Wishlist
Best sellers
-
Hi Torque QRS Clutch Rollers
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven...
-
G4 Engine Mount Torque Stop
This is a new polyurethane motor mount torque stop that replaces the...
-
Brace Kit Bundle
These are our a arm brace kits bundled into one deal. Buy both and get a...
Manufacturers
Suppliers
No supplier
Best sellers
AvailableUpper A Arm Brace Kit
New redesigned brace for 2015. This kit is designed strengthen the upper A Arm rear mounting point just like our original brace but is much easier to install. This new brace is compatible with the Skidoo QRS Tech Link and Racewerx clutch tower brace. As many of you know the A Arm mounting points can bend from impact before the A Arms bend causing expensive repair. The A Arm should bend before the chassis so you can change an A Arm instead of...
New redesigned brace for 2015. This kit is designed strengthen the upper A Arm rear...
New redesigned brace for 2015. This kit is designed strengthen the upper A Arm rear mounting point just like our original brace but is much easier to install. This new brace...
AvailableP Drive Axle Removal Tool
This Axle tool allows for the removal of the axles that hold the Ramps and/or the rollers in the P Drive clutch. This tool is needed to lube the rollers
This Axle tool allows for the removal of the axles that hold the Ramps and/or the...
This Axle tool allows for the removal of the axles that hold the Ramps and/or the rollers in the P Drive clutch. This tool is needed to lube the rollers
AvailableQRS Ratchet Wrench
The wrench includes a T-40 torx bit that will not fall out of the wrench. QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in the 2008 to current ski doo secondary clutches without the need to remove your secondary clutch/shaft. The wrench is just over 12 inches long and has a ratchet on each end. The end is 12 mm. The opposite end is 13 mm.
The wrench includes a T-40 torx bit that will not fall out of the wrench. QRS Ratchet...
The wrench includes a T-40 torx bit that will not fall out of the wrench. QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in the 2008 to...
AvailableG4 .062" Mag Side...
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches....
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
AvailableIsovibe SX Polaris 6MM...
Isovibe SX for the VR1 Polaris. Does not fit on older Polaris models. Does not work with after market risers. DOES NOT WORK WITH POLARIS HANDGUARDS because there is not enough clearance between the isovibe bolt and the handle bar to put the Polaris hand guards on. **NOTE** If you change your riser to a switchback riser you can use this isovibe without interference of your handguards** Part # 5143421 for the Switchback riserblock The...
Isovibe SX for the VR1 Polaris. Does not fit on older Polaris models. Does not work...
Isovibe SX for the VR1 Polaris. Does not fit on older Polaris models. Does not work with after market risers. DOES NOT WORK WITH POLARIS HANDGUARDS because there is not enough...
AvailableIsoVibe SX Procross...
Isovibe SX for New 2012-present Arctic Cat Procross/Proclimbs with stock aluminum riser block ALSO FITS THE CATALYST New Isovibe SX model designed for snowcross racers and aggressive trail/standup riders. SX bushing design absorbs vibration just like the original Isovibe but takes shock absorption to a new level. The new design absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the...
Isovibe SX for New 2012-present Arctic Cat Procross/Proclimbs with stock aluminum riser...
Isovibe SX for New 2012-present Arctic Cat Procross/Proclimbs with stock aluminum riser block ALSO FITS THE CATALYST New Isovibe SX model designed for snowcross racers and...
AvailableG4/G5 Brace addition
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for customers that had bought our kit before we included this new piece. This is a new brace addition to our G4 brace kit. A new piece to further strengthen the front end of the G4. Made from stainless steel and replaces the stock aluminum piece.
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for...
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for customers that had bought our kit before we included this new piece. This is a new brace addition...
AvailableH13 SII High...
Fits: Skidoo Gen4 600R/850/850Turbo/900Turbo = H13 kit Lynx = H13 Polaris 2010+ MADE BY SII Powersports Alpha 2021 Kit 13000lm Output & 5 year warranty The newly released Alpha 2022 kit is the brightest LED kit on the market. The Alpha kit puts out a whopping 13000lm from it's 16 Custom CSP Diodes driven at 130 Watts! The 2022 revision is 30 watts more powerful and 2000LM brighter than the previous popular Alpha Gen 3 kit. These kits...
Fits: Skidoo Gen4 600R/850/850Turbo/900Turbo = H13 kit Lynx = H13 Polaris 2010+ MADE...
Fits: Skidoo Gen4 600R/850/850Turbo/900Turbo = H13 kit Lynx = H13 Polaris 2010+ MADE BY SII Powersports Alpha 2021 Kit 13000lm Output & 5 year warranty The newly released...
AvailableIsovibe SX Red...
Isovibe SX Standard 80 durometer Red replacement bushings.
Isovibe SX Standard 80 durometer Red replacement bushings.
Isovibe SX Standard 80 durometer Red replacement bushings.
AvailableClutch Puller for 850...
Our 850 clutch puller bolt is different than all others. Machined and heat treated right here in the USA. Note: Due to the use of impact wrenches there is No warranty on puller bolts. Also works on the turbos. Works on all p drive clutches.
Our 850 clutch puller bolt is different than all others. Machined and heat treated...
Our 850 clutch puller bolt is different than all others. Machined and heat treated right here in the USA. Note: Due to the use of impact wrenches there is No warranty on puller...
AvailableLinQ Cargo Base Kit -...
Unique mounting fastener usable on any LinQ system accessory. Tool-less installation and removal. Included: 2 Cargo LinQ bases and hardware. Does NOT fit the G4 Wide body. Only the 16" wide.
Unique mounting fastener usable on any LinQ system accessory. Tool-less installation...
Unique mounting fastener usable on any LinQ system accessory. Tool-less installation and removal. Included: 2 Cargo LinQ bases and hardware. Does NOT fit the G4 Wide body. Only...
Available2019 QRS Shim Kit 3mm
Many clutches are misaligned right from the factory, including my brand new 2016 800. We have found that most are out of alignment by 3 mm. This shim kit will correct the issue, making your drive belt run dramatically cooler and last longer.Installation is easy and detailed instructions are included. Fit 2019-22 G4s.
Many clutches are misaligned right from the factory, including my brand new 2016 800....
Many clutches are misaligned right from the factory, including my brand new 2016 800. We have found that most are out of alignment by 3 mm. This shim kit will correct the issue,...
