Wishlist
Best sellers
-
Hi Torque QRS Clutch Rollers
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven...
-
G4 Engine Mount Torque Stop
This is a new polyurethane motor mount torque stop that replaces the...
-
Brace Kit Bundle
These are our a arm brace kits bundled into one deal. Buy both and get a...
Manufacturers
Suppliers
No supplier
Best sellers
AvailableSalazzking Ski Rubbers
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged Rocky Mountains. Polyurethane material won’t freeze up in sub zero temps and doesn’t get mushy in warm spring rides. Sold by the pair.To be used on G4 with expert beginning 2019 and all 2020 models and up. Are you tired of eternally replacing your ski dampers? The damper ejects out the back and then the ski tips straight up and stops you dead in your...
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged...
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged Rocky Mountains. Polyurethane material won’t freeze up in sub zero temps and doesn’t get...
AvailableTRA Clutch Holder
This handy tool holds the clutch from moving while you are removing and installing your puller bolt.
This handy tool holds the clutch from moving while you are removing and installing your...
This handy tool holds the clutch from moving while you are removing and installing your puller bolt.
AvailableG4/G5 RS Upper A Arm...
A set of 8 UPPER ONLY custom made Oil-lite bronze bushings to replace the cheap factory plastic ones. These are for the Race Sled and only fit the upper a arms. Precision machined to fit with no modifications to A-arms or sleeve bushings. Removes all the slop in the front A-arms providing more precise handling. Made in the USA by Snow Shooters.
A set of 8 UPPER ONLY custom made Oil-lite bronze bushings to replace the cheap factory...
A set of 8 UPPER ONLY custom made Oil-lite bronze bushings to replace the cheap factory plastic ones. These are for the Race Sled and only fit the upper a arms. Precision...
AvailableIsoVibe Old Style...
Standard older style bushings for our original first version IsoVibe. Bushings are 80 durometer. Sold as set of 4. Does NOT fit on the newer Isovibe SX. We also have isovibe SX bushings available.
Standard older style bushings for our original first version IsoVibe. Bushings are 80...
Standard older style bushings for our original first version IsoVibe. Bushings are 80 durometer. Sold as set of 4. Does NOT fit on the newer Isovibe SX. We also have isovibe SX...
AvailableG4/G5 extended...
Extended length throttle cable for G4/G5. Cable is approximately 35" long measured from end to end. Measured from housing end to housing end the measurement is approximately 31 1/2". Good for use with our isovibe or taller riser when your cable gets too tight. This is a genuine BRP part. BRP part # 512061175 This is not longer than the Summit cable. It is about the same length. But is longer than other stock cables for G4/G5.
Extended length throttle cable for G4/G5. Cable is approximately 35" long measured from...
Extended length throttle cable for G4/G5. Cable is approximately 35" long measured from end to end. Measured from housing end to housing end the measurement is approximately 31...
AvailableG4/G5 Ski Doo Upper...
Our new G4/G5 upper steering post block replaces the stock plastic blocks with a billet aluminum design with a proven internal rubber bushing. The stock blocks and bushings have excessive clearance that results in your steering post having a lot of slop and movement. Our new kit uses a rubber bushing for vibration isolation and fixes the loose sloppy steering post issue. Fits models with the standard steering system and the rack steering...
Our new G4/G5 upper steering post block replaces the stock plastic blocks with a billet...
Our new G4/G5 upper steering post block replaces the stock plastic blocks with a billet aluminum design with a proven internal rubber bushing. The stock blocks and bushings...
Available3 pin to 2 pin adapter
This plug is used to convert the 3 pin accessory power plug on the G5 to the 2 pin power plug that came on the G4. The new 3 pin G5 plug uses the black and red wire pins for 12 volts when motor is running. You can use the black and white/grey pins for 12v power that is only on when the high beam switch is on. The plug will come with the red wire pin not installed in the 3 pin plug. You can choose how you want the power to work based on which...
This plug is used to convert the 3 pin accessory power plug on the G5 to the 2 pin...
This plug is used to convert the 3 pin accessory power plug on the G5 to the 2 pin power plug that came on the G4. The new 3 pin G5 plug uses the black and red wire pins for 12...
AvailableQRS Shaft Bearing
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the...
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
AvailableTool Caddy
Fits nicely in the rear seat or the glove box. A quality hard zippered case includes the following:8, 10, 12, & 13 mm wrenches.30 inch telescoping magnet with 20 lb. lift capacity.20 - 8 inch zip ties.15 foot roll of duct tape.1/4 inch ratchet.1/4 inch Driver.1/4 inch T25 & 40 torx sockets.1/4 inch phillips & flat tip sockets.1/4 inch universal joint.The Torx sockets fit many of the screws used on...
Fits nicely in the rear seat or the glove box. A quality hard zippered case...
Fits nicely in the rear seat or the glove box. A quality hard zippered case includes the following:8, 10, 12, & 13 mm wrenches.30 inch telescoping magnet with 20...
AvailableSkidoo XS Vent Template
Drill template to add vents to you side panels on a Skidoo XS. This template kit allows you to drill additional vents in the knee area of your side panels to let hot air out. Can be reused to vent multiply sleds. Drill as many holes as your would like for your own pattern. Template is designed for 1/4" holes but up to 5/16" holes can be used.
Drill template to add vents to you side panels on a Skidoo XS. This template kit...
Drill template to add vents to you side panels on a Skidoo XS. This template kit allows you to drill additional vents in the knee area of your side panels to let hot air out....
AvailableG4 Garmin GPS Mount...
Garmin Montana AMPS Mount with Audio and Power Cable - Take advantage of Montana's versatility. Mount your Montana on your motorcycle or ATV and take it on the road! This kit includes the mount, hardware (AMPS arm/ball socket not included) and a cable with G4 Power Plug, audio, and data wires. It also includes anti-glare screen protectors. Kit Includes: MountHardwareCable with Power - Data - Audio wiresAnti Glare Screen...
Garmin Montana AMPS Mount with Audio and Power Cable - Take advantage of Montana's...
Garmin Montana AMPS Mount with Audio and Power Cable - Take advantage of Montana's versatility. Mount your Montana on your motorcycle or ATV and take it on the road! This kit...
AvailableP Drive ACE Complete...
P Drive Tool Kit-3 ACE contains all the tools needed to remove BOTH clutches. Disassemble and reassemble both clutches on your 2017 to current Ski Doo.The tool kit also includes the new style clutch holder that works on 2017 to current P Drive clutches including the new 2023 "Closed Window clutch". The P drive Tools we make are the least expensive complete kits on the market today, and are made in the USA, including the clutch puller...
P Drive Tool Kit-3 ACE contains all the tools needed to remove BOTH clutches....
P Drive Tool Kit-3 ACE contains all the tools needed to remove BOTH clutches. Disassemble and reassemble both clutches on your 2017 to current Ski Doo.The tool kit also...
